Sunday, March 24, 2013

Auscision AHGX's weathering by Barcoola

Hi All

Here is some shots of faded weathering on Auscision Models AHGX, the results shown here are brush painted with some chalk dust, the example below is modeled off AHGX 11.


A gaggle of four weathered AHGX's
 Here is the original Auscision paint job, with just the bogies slightly weathered.
 All models were painted an all over faded green first, then the ends and underframe was painted a road grime colour.  Rust spots were added.  In this example chalks were added to reflect the weathering on AHGX 11.









 The horizontal sections of the A and B ends have been painted road grime, along with the I beams at both ends.




I still have to give each wagon an overall dusting of weathering and seal the model with a matt clear coat.

Enjoy

Scott

Tuesday, March 19, 2013

Trailerail Rolling stock question answered


Hi All

Jim has asked for info on AN rolling stock as follows:

Hi Scott, Brilliant stuff given me a few good idea. I have had an interest in AN since they arrived here in WA. Not having much space I decided to model a train for a shelf, the train is trailerrail as you will know was set up in Perth some time ago. I have attached a video clip below which I took in Kal. The reason for the inquiry is I wish to model the barrier wagon and crew accommodation coach along with what seems like a compressor wagon which I see three such models in these pages, can you point me in the right direction.
http://youtu.be/QnLURKa63gk

The Crew Accommodation coach is an AN brake relay van AVDP. BGB made a kit awhile back.
The "barrier" wagon is an AN articulated container wagon AQEY with a towing frame, and spare bogie carrier.  At this point I think this is a scratch build, contact islingtonplans@bigpond.com or phone: 08 8352 3339

I hope this helps you out.

Enjoy

Scott

Monday, March 11, 2013

Austrains NR95 weathering Ultra modern Barcoola style

Hi All
Here is my first attempt at a ultra modern Barcoola locomotive.
I chose a repainted NR95, with PN decals and arrows of in-decision removed.

On what would be a good long weekend for most, I was held up by a bad cold, however, Glen visited this weekend, always good to catch up mate.  The VB Fridge got a bit of a whipping.
I started this on Thursday last week, Monday I was feeling able to finish it off.

 The first thing that was done was to remove all the handrails.  I looked at is removing the NRC end and side decals and ISO 9001 decals, I used mentholated spirits and a paper towel, and a slow action enable the symbols to be removed without too much damage to the rest of the paint work.

Next is to start the fading, the colour of the NRC marigold, NR1 to 60  faded  quicker  than 60 to 120.
However NR95 is a faded candidate, again I used humbrol paints, mixed to get the appropriate hue.
The NRC Grey was the next to get the treatment, a little more white and blue will give the faded look you are after.

The bogies and frame need to be painted overall road grime, start with Humbrol Matt 32 grey and add white and a touch of humbrol matt 73 rust, and just a touch of humbrol 6 brown.  Make sure you paint the frame as well as the pipe and electrical sides. of the "fuel tank".
For the dirt streaks I used the same mix as for the fuel tank, however I cut the hue with mineral turpentine, and added a tiny bit of brown.
The roof was slapped with a wash of humbrol black.
The air deflectors on the No 2 end were painted royal blue with Signs of all kinds SOAK 74 various Pacific National logos pack 2.
The edge of the radiator assembly was also painted with a slightly cut hue of the same.
Warning signs were from Microscale decal sheet.
The handrails were then put back on , and appropriately weathered.
The 3M reflective stripes are small sections of AN yellow stripes cut up appropriately.
The Cab side numbers are rub on decals.
What you see above is all accomplished with a brush, so if you don''t have a airbrush these are the results you can get.


NR95 departing Spencer junction on SP3



Note the difference between NR95 and NR82 which is untouched.


note the difference in the NRC grey.














 While I don't encourage NRC modeling (nothing personal), this PN "Patch" version will sit quite well in the Barcoola ultra modern era, and will keep Glen happy.
As a result of my last efforts Glen as left some SCT stock to weather, so i will do mine and his at the same time, maybe even Jon's if he is interested.

So stay tuned.

Updated:
as stated by  Wagonfreak
.  The part fading on the cab of NR95 is due to being involved in a collision in Dynon with a N class, in 1997, and the Cab replacement and repaint.

Enjoy

Scott


Thursday, March 7, 2013

50 shades of AN green and rust

Hi All

More bulk weathering has been on the work bench, and the AOOX's and AOGA's have been getting the treatment.

50 shades of rust and AN green and counting, this sort f variety with colours makes a very convincing fleet.

With a little work Orient Express Productions AOGA's mucky up a treat.  The light rust is chalks, the heavy rust is washes.


There is always one wagon that has seems to be worse for wear, than this is it, fairly heavy fading, and rusty interior.

A more red, colour on the bottom suggest less scrapping on the floor.

Light rust on the floor means that the wagon has had recent work.  dark rust at higher locations on the wagon.

The many shades of open wagon "bottom rust"
Enjoy

Scott

Monday, March 4, 2013

"Tin roof rusty" VLEX, ABFX weathering by Barcoola

Hi All

To parody the B52's Love Shack (not a big fan myself), here are some shots of my attempts of "tin roof Rusty".
I have been having a blast getting back into weathering, and this is my latest batch.

Front to back, Is a Powerline VLEX, and Four Ausicion ABFX's, for the rust stains , a mix of Humbrol colours  was dabbed on in short sections, while it's still wet, you can smear the stain with a brush, to add a bit of depth you can have a little weathering chalk dust on the brush, to give that extra depth.



After adding the rust stains, the roof was sprayed a light coating of antique white to cut the shine on the silver.  Then a heavier coat of a custom mix of road grime,   followed by matt clear. 

I find that red wagons need something a little extra to offset the dull colour, I would recommend a sand  or more antique white, to pep up the browns and reds.


Another extreme AN green ABFX, I used photo examples to get the base colour right, then added the rust spots on the roof and scratch marks on the wagon sides, from photos, it seems that in the process of loading and un-loading the inside of the wagon would get a bit of a battering, however the closer to the door opening the more punishment it got, so the damage near the ends of the wagon seem to be less than around the doors.  The end result is that the panels would rust on the outside, from the damage caused on the inside.


Three versions on Maroon ABFX's,some of these were done using  Pelle K Soeborg's Done in Day book techniques, for what its worth, they didn't seem to be a successfull as I thought.  It ended up with more of a rotten growth on the roof.  I will keep experimenting, to see what I come up with.

Exhibit A un-touched, Exhibit B weathered.

Side rust marks complete the model, as does swapping the bogies for Yellow.





As per request, here is the recipe for the AN green, sorry it is not that definitive, but here goes.
First and foremost you need a photograph of the colour you intend to model.
Check out Norm Bray's site, I am sure you will find a suitable subject.  This is the colour you are after.  If you are the type that is all about paint specs and colour chips, this process may not be for you, this is not an exact science!

Start with Humbrol 101 green, I use a plastic tray with 6 self contained compartments, as a mixing tray.
Add a small amount of 101 green, you usually have to mix the green first to get all the pigments mixed in, so what ever drops off your mixing stick.
Add to this some Humbrol Matt white.
Check the photo to see if you are getting close with the hue.
When you think you have gone too far add a touch of royal blue.
This will knock the yellow out of the paint, and give you something close.

Enjoy

Scott